Friday 12 September 2014

Team "Back to School" blog hop

Hello Crafty Friends!
   I am really excited about this months team blog hop!! The team members of the brae-ers are showing you different tutorials!!  If you have come from Heather's blog then you are in the right place....My technique is on how to make a shaker card :)  These are always very popular and really very easy. Please follow along with me :) start with your supplies, you will need acetate (overhead projector) paper and double sided pop up tape
 Stamp your image on a piece of cardstock or B&T paper. Here I used the angle from
next line the image with the double sided tape,  I cut ours in half to keep it thin and go farther.
Make sure there are no gaps in the tape or shaker stuff will leak out of your card.

cut a frame either with the cruicut or by hand. This time I just did it by hand. 
Cut the acetate the same size and adhere with our tombo adhesive

Add beads, glitter, whatever you would like, smaller the better...dont remove the backing to the double sided tape yet or the beads will stick to that and not close tightly enough.

Then remove the other side of the sticky tape and put the frame with the acetate on the top of the image.

Now you have an image that you can place anywhere. Next step is to finish your card

I used the new Yuletide paper and \i am very happy with how my card turned out.
Here is another example with a different type of frame...old card I keep around for examples

 And here is an example of how I used a shaker box on a layout. I added "sand" and the main image was a picture. Sorry its sideways.

I hope you have found my tutorial helpful or inspiring. Now hop on to Brae's Blog to see her tutorial. If you dont have a consultant and you would like to order the products used please message me or you can shop Here at my web site
Michelle


2 comments: